Tinnie 3.3 Mt With 12 Hp Evinrude On Trailer

HI, I am selling the tinnie. It has been in the intermediate family since new... I acquired it 2 years ago i spent approx $500 to make it reliable again. It required a new fuel pump, fuel lines and new tank. It also required a carburetor overhaul (due to fuel gumming) and new coil pack. With a replacement water pump impeller (of course!) and gearbox oil change the motor now runs superb.

The Boat is sound and has no leaks. It has floatation blocks under all seat bases.It has a heavy aluminium keel plate (photo) so hull protection is great if it gets shallow. There is a cracked weld in the upper support box section at the transom and would be nice to have it aluminium welded one day. It never bothered me and the crack is only a weld line... not major structure(photo). $50 at the aluminium welders will fix it easy!

The trailer is a Swiftco and it has just had brand new wheel bearing sets fitted with marine grease. Tyres appear to be in good condition with no leaks.I removed all the lights as the wiring was old and I use a trailer board now. The trailer is registered in QLD till December. With the sale I will include the licence plate and transfer form to be filled. I recommend purchasing or making a trailer board so you can legally drive the tinnie home.

This is an awesome estuary tinnie, It goes like a cut snake and the bigger motor means not much throttle is needed. This keep the fuel consumption way low and puts no stress on the drive line. Since engine servicing, the boat has done approx 20 hours running. I am selling this tinnie as I would like to upgrade to a bigger tinnie (with trailer). The kids are wanting to take friends out now and I would like to have a 14 ft with a 30 hp.

Happy Bidding!