Wharram Tanenui Catermaran 27'6"

THE PICTURE OF TANENUI UNDER SAIL IS NOT OF THIS BOAT. This is a sailing catamaran, 28ft X 12ft approx. Plywood construction, with a bridge deck between the original hulls and an added foam glass cabin superstructure mostly finished. It was previously converted to a "houseboat". Structurally it is good with crossbeams replaced.

Fittings have been galvanized. May include a winch and hand pump It comes with a Light alloy mast and an outboard bracket. Damaged ply has been removed leaving 2 of 4" X 9" holes in the hull sides. The ply floor of the bridging cabin needs replacing, its supporting structure is OK. The Hulls should be glassed if it is to be left on a mooring.

I did major work in the late 1990s. Stored now since then- bviously needs more work Designers webpage https://www.wharram.com/site/catalog/study Building Method: Ply/Timber/Epoxy/LaminateLength Overall: 28' 3" 8.61 m Beam Overall: 12' 6" 3.18 m Waterline length: 23' 7" 7.18 m Draft: 1' 8" 0.50 m Weight: 2204 lbs 1000 kg Loading capacity: 2204 lbs 1000 kg Sail area: 310 sqft 28.8 sqm Building Time Estimate: 1000 hrs YOU WILL HAVE TO REMOVE IT AT YOUR COST May help arrange transport. Contact me to arrange inspection inspection